Accessories to overcome space and access limitations
Special Extension Spanners
- Where design or space limitations preclude the use of a dial wrench and a standard nut socket, special extension spanners can be manufactured to allow access
- See illustrations for typical examples. When ordering these special attachments, please supply the following information:
(A) Square drive size
(B) A/F size of spanner end
(C) End type - Ring, Open or Flared
(E) Centred distance between the square drive and the spanner end fitting
(T) Maximum Torque to be applied
Click on the image to enlarge
-
Image 1
-
Image 2
-
Image 3
Click on the table to enlarge
|
Model |
All ADS Models |
Models BDS80A/AS/E/ES |
Other BDS Models |
CDS Models |
DDS Models |
EDS Models |
||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| mm | in | mm | in | mm | in | mm | in | mm | in | mm | in | |
| Dimension L | 190 | 7.5 | 368 | 14.5 | 445 | 17.5 | 635 | 25 | 850 | 33.5 | 1727 | 68 |
Due to the low torque ranges and high accuracy it is recommended that Models ADS 4 & ADS 8 should not be used with extension spanners
Click on the table to enlarge
Request info
| Adaptor Model | 16mm Spigot |
German 9x12 Cavity Fitting |
Wedge Fitting |
|---|---|---|---|
| Ratchet | 3/8" 1/2" | 3/8" 1/2" | 3/8" 1/2" |
| Ordering Code | A96102 A96103 | A96112 A96113 | A96122 A96123 |
Extension Adaptors for ADS and BDS Wrenches
- Torqueleader Extension Adaptors offer an alternative method of overcoming space and access limitations when using ADS and BDS Dial Measuring Torque Wrenches. The Adaptors enable the use of a wide range of end fittings with 16mm Spigot, 9x12 German and Wedge fixings. Each type of Adaptor is available with either a 3/8” or 1/2” female square drive and is easily fitted to the wrench male drive.
- Attach the end fi tting to the extension adaptor
- Fit the assembly to the wrench square drive, taking care that it is “in-line” with the wrench body axis
- Measure and note distance ‘E’ from centre of end fitting to wrench square drive