INFORMATION ON TORQUE TOOL ACCESSORIES
- Torqueleader stock a wide range of Accessories to complement our Torque Tools, enabling you to obtain everything you need for your application from one source
- If you require Accessories not in our standard range please call our Sales Hotline +44 (0) 1483 894476
HEXAGON KEY ADAPTORS
- In response to customer demand, Torqueleader have introduced two easy to use adaptors that allow a range of hexagon keys to be used with the TBN 2 and TBN 10
- The two adaptors allow the use of hexagon keys from 1.0 mm to 5.0 mm (see page 53) and are interchangeable using a simple locking screw arrangement
- As the TBN 2 and 10 are length dependent, factory fitted hexagon keys will have a cut length of 25 mm from centre of hexagon drive to the rear internal face of the adaptor (see diagram - top right), to enable the tools to be calibrated and/or preset
- Tools factory set and supplied with a hexagon key will come with a Certificate of Calibration. Tools that are supplied without a hexagon key will need to be preset to the actual length of the hexagon key used. Please call our Sales Hotline for more information
Click on the image to enlarge
-
Image 1
-
Image 2
-
Image 3
-
Image 4
-
Image 5